Published record
Prismatic form-factor illustration, not a photograph of CALB L148N50B
Form-factor illustration · not a model photograph
NMCPrismatic

CALB L148N50B

CALB L148N50B: 50Ah, 3.66V NMC prismatic battery cell. weight 865g, cycle life 2,000 cycles.

Capacity

50Ah

Chemistry

NMC

Format

Prismatic

Weight

865g

Specification

Engineering parameters

Core fields 3/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandCALB
ModelL148N50B
Form factorPrismatic
ChemistryNMC
Nominal capacity50Ah
Nominal voltage3.66V
Voltage range2.5–4.2 V
ApplicationRechargeable
Energy (calculated)183 Wh
Gravimetric energy density (calculated)212 Wh/kg
Max pulse discharge
400 A / 10 s
Conditions & source

最大脉冲放电电流(短脉冲) Maximum Pulse Discharging Current(Short Pulse) 400A 电池温度低于50°C,且最长放电时间为10s When battery temperature is below 50°C, the maximum discharge can last 10s

· Page 8

Source datasheet (access rules apply)
Operating temperature
Charge -20–55 ℃; Discharge -30–55 ℃
Conditions & source

~97% 7 工作温度 Operating Temperature 充电温度 Charging Temperature -20~55°C 参考第 4.2 节 Refer to section 4.2 放电温度 Discharging Temperature -30~55°C 参考第 4.3 节 Refer to section 4.3 8 电池重量 Weight 865±20g 9 壳体材料 Shell

· Page 7

Source datasheet (access rules apply)

0~55°C 参考第 4.2 节 Refer to section 4.2 放电温度 Discharging Temperature -30~55°C 参考第 4.3 节 Refer to section 4.3 8 电池重量 Weight 865±20g 9 壳体材料 Shell Material 铝合金 Aluminium alloy 4.2 充电模式 Charging Model 序号 NO. 参数

· Page 7

Source datasheet (access rules apply)
Internal resistance
0.8 mΩ · AC 1000 Hz
Conditions & source

Internal Resistance(Ac.1kHz) 0.60~0.80mΩ 新电池、50%SOC Fresh Cell、50%SOC

· Page 7

Source datasheet (access rules apply)
Cell weight
865 g
Conditions & source

8 电池重量 Weight 865±20g

· Page 7

Source datasheet (access rules apply)
Cycle life
≥2,000 cycles
Conditions & source

Cycle Life ≥2000 次 ≥2000 cycles a)室温下,以 50A 恒流持续充电至单体电池电压 4.25V, 然后在4.25V 下恒压持续充电直至电流下限 ≤2.5±0.5A At room temperature, charged to 4.25V at a constant current of 50A, and then, changed continuously with constant voltage of 4.25V until the cu rrent was not more than 2.5±0.5A. b)室温下,以 50A 恒流放电至终止电压 2.75V; Discharged at 50A to the cut-off voltage 2.75V at room temperature; c) 重复a)~b), 至容量衰减为额定容量的 80%止, 所完成的循环次数定义为该电池的循环寿命。 Repeating steps of a) ~ b), until the discharge capacity reached the 80% of rated capacity, the number of cycles completed was defined as the battery cycle life.4.7 安全性能 Safety Characteristics 序号 NO. 项目 Items 技术要求 Technical Requirements 测试方法及步骤 Test Methods & Steps

· Page 12

Source datasheet (access rules apply)

Not provided: Dimensions, Max continuous charge, Max continuous discharge, Max pulse charge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email