CALB L173F230C

Product Specification of L173F230C 1 额定容量 Rated Capacity 230 Ah 1C 放电 1C Discharge 237.6 Ah 标准放电 Standard Discharge 2 额定电压 Rated Voltage 3.15 V 1C 放电 1C Discharge 3.2V 标准放电 Standard Discharge 3 额定能量 Rated Energy 724.5 Wh 1C 放电 1C Discharge 760.3 Wh 标准放电 Standard Discharge 4 电池重量 Cell Weight 4.14±0.08 kg / 5 质量能量密度 Mass Energy Density 183Wh/kg 标准放电 Standard Discharge 6 电池体积 Cell Volume 1.91L, 不含极柱 (without terminal) / 7 体积能量密度 Volume Energy Density 400 Wh/L 标准放电 Standard Discharge 8 内阻（ACR） Alternating Current Resistance 0.2~0.3 mΩ 20%SOC，室温，交流阻抗, 1000 Hz 20%SOC, Room Temperature, AC Impedance, 1000 Hz 9 温度范围 Temperature Range 充电温度 Charging Temperature -20~65° C / 放电温度 Discharging Temperature -30~65°C / 存储温度 Storage Temperature -40~65°C / 10 快充时间（0-100%SOC） Fast Charging Time(0-100%SOC) 80min / 11 电压范围 Voltage Range 2.5~3.65 V 0℃＜T≤65℃ 2.0~3.65 V -30℃≤T≤0℃ 说明： 1）标准充电：在 25±2℃环境下，以 1/3C 的电流恒流充电至单体电芯电压上限后，转为恒压充电，至充电电流小于 0.05C 时，停 止充电，并且在下一个工步开始前需静置 30 分钟； 2）标准放电：在 25± 2℃环境下，以 1/3C 的电流恒流放电至单体电芯电压下限后，停止放电，并且在下一个工步开始前需静置 30 分钟。 Instructions: 1) Standard charge: At the temperature of 25 ± 2 ℃, charge the cell at a constant current of 1/3 C until the voltage of the single cell is up to upper voltage limit, and then change to the constant voltage. When the charge current is less than 0.05C, stop charging. The cell needs to stand for 30 minutes before the next work step. 2) Standard discharge: At the temperature of 25 ± 2 ℃, discharge at a constant current of 1/3 C until the voltage of the cell is up to lower voltage limit, and then stop discharging. The cell needs to stand for 30 minutes before the next work step.

Product Specification of L173F230C 1 额定容量 Rated Capacity 230 Ah 1C 放电 1C Discharge 237.6 Ah 标准放电 Standard Discharge 2 额定电压 Rated Voltage 3.15 V 1C 放电 1C Discharge 3.2V 标准放电 Standard Discharge 3 额定能量 Rated Energy 724.5 Wh 1C 放电 1C Discharge 760.3 Wh 标准放电 Standard Discharge 4 电池重量 Cell Weight 4.14±0.08 kg / 5 质量能量密度 Mass Energy Density 183Wh/kg 标准放电 Standard Discharge 6 电池体积 Cell Volume 1.91L, 不含极柱 (without terminal) / 7 体积能量密度 Volume Energy Density 400 Wh/L 标准放电 Standard Discharge 8 内阻（ACR） Alternating Current Resistance 0.2~0.3 mΩ 20%SOC，室温，交流阻抗, 1000 Hz 20%SOC, Room Temperature, AC Impedance, 1000 Hz 9 温度范围 Temperature Range 充电温度 Charging Temperature -20~65° C / 放电温度 Discharging Temperature -30~65°C / 存储温度 Storage Temperature -40~65°C / 10 快充时间（0-100%SOC） Fast Charging Time(0-100%SOC) 80min / 11 电压范围 Voltage Range 2.5~3.65 V 0℃＜T≤65℃ 2.0~3.65 V -30℃≤T≤0℃ 说明： 1）标准充电：在 25±2℃环境下，以 1/3C 的电流恒流充电至单体电芯电压上限后，转为恒压充电，至充电电流小于 0.05C 时，停 止充电，并且在下一个工步开始前需静置 30 分钟； 2）标准放电：在 25± 2℃环境下，以 1/3C 的电流恒流放电至单体电芯电压下限后，停止放电，并且在下一个工步开始前需静置 30 分钟。 Instructions: 1) Standard charge: At the temperature of 25 ± 2 ℃, charge the cell at a constant current of 1/3 C until the voltage of the single cell is up to upper voltage limit, and then change to the constant voltage. When the charge current is less than 0.05C, stop charging. The cell needs to stand for 30 minutes before the next work step. 2) Standard discharge: At the temperature of 25 ± 2 ℃, discharge at a constant current of 1/3 C until the voltage of the cell is up to lower voltage limit, and then stop discharging. The cell needs to stand for 30 minutes before the next work step.