Published record
Cylindrical form-factor illustration, not a photograph of DFD LFR46140WE1
Form-factor illustration · not a model photograph
LFP / LiFePO₄Cylindrical

DFD LFR46140WE1

DFD LFR46140WE1: 30Ah, 3.2V LFP cylindrical battery cell. Dimensions Ø46.9 × 142.3 mm, weight 540g, cycle life 3,000 cycles.

Capacity

30Ah

Chemistry

LFP / LiFePO₄

Format

Cylindrical

Weight

540g

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandDFD
ModelLFR46140WE1
Form factorCylindrical
ChemistryLFP / LiFePO₄
Nominal capacity30Ah
Nominal voltage3.2V
Voltage range2.5–3.65 V
DimensionsØ46.9 × 142.3 mm
ApplicationRechargeable
Energy (calculated)96 Wh
Gravimetric energy density (calculated)178 Wh/kg
Volumetric energy density (calculated)391 Wh/L
Max continuous charge
≤36 A
Conditions & source

由规格书额定容量 30 Ah × 原文 1.2C 换算。 最大持续充电电流 Max. Continuous Charge Current 1.2C 25~40°C, Max.50%SOC

· Page 8

Original excerpt

最大持续充电电流 Max. Continuous Charge Current 1.2C 25~40°C, Max.50%SOC

Source datasheet (access rules apply)
Max continuous discharge
≤90 A
Conditions & source

由规格书额定容量 30 Ah × 原文 3C 换算。 最大持续放电电流 Max. Discharge Current (Continuous) 3C 不适用于循环 Not for cycle

· Page 9

Original excerpt

最大持续放电电流 Max. Discharge Current (Continuous) 3C 不适用于循环 Not for cycle

Source datasheet (access rules apply)
Max pulse discharge
150 A / 30 s
Conditions & source

由规格书额定容量 30 Ah × 原文 5C 换算。 最大脉冲放电电流 Maximum Pulse Discharging Current 5C 电芯温度低于 55°C,且最长放电时间为 30s。 The maximum discharge time can last 30s with cell temperature below 55°C

· Page 9

Original excerpt

最大脉冲放电电流 Maximum Pulse Discharging Current 5C 电芯温度低于 55°C,且最长放电时间为 30s。 The maximum discharge time can last 30s with cell temperature below 55°C

Source datasheet (access rules apply)
Operating temperature
Charge -20–60 ℃; Discharge -30–60 ℃
Conditions & source

nth 5.1.11 工作环境温度 Operating Temperature 充电 Charge:-20°C~ 60°C 放电 Discharge:-30°C~60°C 5.1.12 储存环境要求 Storage Requirements 温度 Temperature:-30°C~ 60°C 无凝露, No condensation 湿度 Humidity:≤75%RH

· Page 7

Source datasheet (access rules apply)

ating Temperature 充电 Charge:-20°C~ 60°C 放电 Discharge:-30°C~60°C 5.1.12 储存环境要求 Storage Requirements 温度 Temperature:-30°C~ 60°C 无凝露, No condensation 湿度 Humidity:≤75%RH

· Page 7

Source datasheet (access rules apply)
Internal resistance
≤1.2 mΩ · AC; ≤4 mΩ · DC
Conditions & source

ACR: ≤1.2mΩ DCR: ≤4.0 mΩ @ 3C&10S

· Page 7

Source datasheet (access rules apply)

DCR: ≤4.0 mΩ @ 3C&10S

· Page 7

Source datasheet (access rules apply)
Cell weight
540 g
Conditions & source

5.1.8 电芯重量 Weight 540±20g(含膜)

· Page 7

Source datasheet (access rules apply)
Cycle life
≥3,000 cycles · EOL 70%
Conditions & source

25±2℃、1C阶梯至3.65V、1C放至2.5V,各静置60min,至额定容量70%;45℃1500次80%EOL另列。

· Page 10

Original excerpt

广西宁福新能源科技有限公司 Guangxi New-fortune New Energy Technology Co., Ltd. 版本:V1.2 生效日期:2026.01.09 LFR46140WE1-30Ah-N 第 10页共 21页 60% 0.3C 0.5C 0.8C 1.0C 1.2C 1.2C 0.8C 0.5C 0.2C 50% 0.3C 0.5C 0.8C 1.0C 1.2C 1.2C 0.8C 0.5C 0.2C 40% 0.3C 0.5C 0.6C 1.0C 1.0C 1.2C 0.8C 0.5C 0.2C 30% 0.2C 0.4C 0.6C 0.8C 1.0C 1.2C 0.8C 0.5C 0.2C 20% 0.1C 0.25C 0.5C 0.8C 0.8C 1.2C 0.8C 0.5C 0.2C 10% 0.1C 0.25C 0.5C 0.5C 0.5C 1.0C 0.5C 0.5C 0.1C 5% 0.1C 0.1C 0.5C 0.5C 0.5C 0.5C 0.5C 0.5C 0.1C 截止电压 2.0V(含 0℃) 2.5V 6. 常规性能 General Performance No. 测试项目 Item 测试方法 Test Method 判定标准 Decision Criteria 6.1 室温循环 Cycle Life 在 25℃±2℃环境下,用 1C 阶梯充电至 3.65V,搁置 60 分钟,再用 1.0C 电流放电 至 2.5V;又搁置 60 分钟,重复以上步骤, 直到放电容量是额定容量的 70%。 At 25℃±2℃, Charge the cell with 1.0C Step to 3.65V, rest for 60min, then discharged at a current rate of 1.0C to 2.5V ,rest for 60min.Repeat the above steps untill the discharging capacity lower than 70% of the rated capacity of the cells. ≥3000 Cycles 6.2 高温循环 Cycle Life 在 45℃±2℃环境下,用 0.5C 恒流充电至 3.65V,再以 3.65V 恒压充电至电流 0.05C, 搁置 30 分钟,再用 0.5C 电流放电至 2.5V; 又搁置 30 分钟,重复以上步骤,直到放电 容量是额定容量的 80%。 At 45℃±2℃ , Charge the cell with 0.5C to 3.65V, then charge at constant voltage until the current drops to 0.05C ,rest 30min, then discharged at a current rate of 0.5C to 2.5V ,rest 30min.Repeat above steps untill discharging capacity lower than 80% of the ≥1500Cycles

Source datasheet (access rules apply)

Not provided: Max pulse charge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email