DFD LFR60180WE1
DFD LFR60180WE1: 65Ah, 3.2V LFP cylindrical battery cell. Dimensions Ø60.2 × 180.1 mm, weight 1.12kg, cycle life 2,000 cycles.
Capacity
65Ah
Chemistry
LFP / LiFePO₄
Format
Cylindrical
Weight
1.12kg
Specification
Engineering parameters
Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.
Conditions & source
由规格书额定容量 65 Ah × 原文 1/2C 换算。 5.1.7 最大持续充电电流 Max Charge Continuous Current 1/2C
Source version: V1.0 · Page 7
Original excerpt
5.1.7 最大持续充电电流 Max Charge Continuous Current 1/2C
Conditions & source
由规格书额定容量 65 Ah × 原文 1C 换算。 5.1.8 最大持续放电电流 Max Discharge Continuous Current 1C
Source version: V1.0 · Page 7
Original excerpt
5.1.8 最大持续放电电流 Max Discharge Continuous Current 1C
Conditions & source
由规格书额定容量 65 Ah × 原文 3C 换算。 最大脉冲放电电流 Maximum Pulse Discharging Current 3C 电芯温度低于 55°C,且最长放电时间为 10s。 The maximum discharge time can last 10s with cell temperature below 55°C
Source version: V1.0 · Page 9
Original excerpt
最大脉冲放电电流 Maximum Pulse Discharging Current 3C 电芯温度低于 55°C,且最长放电时间为 10s。 The maximum discharge time can last 10s with cell temperature below 55°C
Conditions & source
hs) 5.1.13 工作环境温度 Operating Temperature 充电 Charge:0°C~60°C 放电 Discharge:-20°C~60°C 5.1.14 储存环境要求 Storage Requirements 温度 Temperature:-30°C~ 60°C 存储环境湿度≤85%RH,无凝露 Storage ambient humidity < 85%RH, No condensation
Source version: V1.0 · Page 7
Source datasheet (access rules apply)perating Temperature 充电 Charge:0°C~60°C 放电 Discharge:-20°C~60°C 5.1.14 储存环境要求 Storage Requirements 温度 Temperature:-30°C~ 60°C 存储环境湿度≤85%RH,无凝露 Storage ambient humidity < 85%RH, No condensation
Source version: V1.0 · Page 7
Source datasheet (access rules apply)Conditions & source
Conditions & source
5.1.10 电芯重量 Weight 1120±30g(含 PET 膜)
Source version: V1.0 · Page 7
Source datasheet (access rules apply)Conditions & source
25±2℃室温循环，1/3C恒流恒压充至3.65V、截止0.05C，1/2C放电至2.5V，各静置30min，容量至额定70%；45℃1200次另列。
Source version: V1.0 · Page 10
Original excerpt
广西宁福新能源科技有限公司 Guangxi New-fortune New Energy Technology Co., Ltd. 编号：DFD-03-G-TD-019 版本：V1.0 生效日期：2025 年 9 月 28 日 LFR60180WE1-65Ah-N 第 10页共 22页 10% 0.2C 0.2C 0.2C 0.2C 0.2C 0.3C 0.3C 0.3C 0.3C 截止 电压 2.0V 2.5V 6. 常规性能 General Performance 序号 No. 测试项目 Item 测试方法 Test Method 判定标准 Decision Criteria 6.1 室温循环 RT Cycle Life 在 25℃±2℃环境下，1/3C 恒流充电至 3.65V，恒压 3.65V 充电至 电流 0.05C，搁置 30 分钟，1/2C 电流放电至 2.5V，搁置 30 分钟， 重复以上步骤，直到放电容量达到额定容量的 70%。 At 25℃±2℃environment,using 1/3C constant current charged to 3.65V, then constant voltage charge to current declines to 0.05C,rest 30min,constant current 1/2C discharge to 2.5V,rest 30min.Repeat above steps till discharging capacity lower than 70% of the rated capacity of the cells. ≥2000 Cycles 6.2 高温循环 Cycle Life 在 45℃±2℃环境下，1/3C 恒流充电至 3.65V，恒压 3.65V 充电至 电流 0.05C，搁置 30 分钟，再用 1/2C 电流放电至 2.5V，搁置 30 分钟，重复以上步骤，直到放电容量达到额定容量的 70%。 At 45℃±2℃environment,using 1/3C constant current charged to 3.65V, then constant voltage charge to current declines to 0.05C,rest 30min,constant current 1/2C discharge to 2.5V,rest 30min.Repeat above steps till discharging capacity lower than 70% of the rated capacity of the cells. ≥1200 Cycles 6.3 高低温放电 Discharge Capacity under Different Temperature -20℃容量保持率 -20℃ Retention Ratio 在 25℃±2℃下，标准充电方式充满，然后 在目标温度下搁置一定时间（10℃以上不 低于 4h，10℃以下不低于 8h），以 1C 放 电至 2.5V（0℃及以下温度放电至 2.0V）。 At 25℃±2℃, fully charge with standard charging method. Then leave it at the target temperature for a certain period of time (not less than 4 hours above 10℃, and not less than 8 hours below 10℃). Discharge at 1C to 2.5V (discharge to 2.0V at temperatures ≥70% -10℃容量保持率 -10℃ Retention Ratio ≥80% 0℃容量保持率 0℃ Retention Ratio ≥85% 25℃容量保持率 25℃ Retention Ratio 100%
Not provided: Voltage range, Max pulse charge.
Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.