Gotion High-tech IFP20100140A
Gotion High-tech IFP20100140A: 30Ah, 3.2V LFP prismatic battery cell. Dimensions 100.5 × 20.7 × 144.5 mm, cycle life 2,000 cycles.
Capacity
30Ah
Chemistry
LFP / LiFePO₄
Format
Prismatic
Weight
Not provided
Specification
Engineering parameters
Core fields 3/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.
Conditions & source
timum working Temperature 10~35°C 2.3.2 充电温度范围 Charge temperature range 0~55°C 充电电流,见附件 A.1 Charging current, see appendix A.1 2.3.3 放电温度范围 Discharge temperature range -30~60°C 电芯表面温度≤65°C Cell surface temperature≤65°C 3. 外观
Source version: I · Page 8
Source datasheet (access rules apply)2.3.3放电温度范围-30～60℃；另要求电芯表面温度≤65℃，不将表面极限65℃替代环境放电范围；DCR矩阵不作边界。
Source version: I · Page 8
Original excerpt
合肥国轩高科动力能源有限公司 HEFEI GOTION HIGH-TECH POWER ENERGY Co.,Ltd 编号 No Q/GX020-2026 标题： Title： IFP20100140A-30Ah 锂离子电池产品规格书 Product Specification of IFP20100140A -30Ah Lithium Ion Rechargeable Cell Total pages 27 Page 8 2.3 工作温度范围 Working Temperature Range 项目 Item 参数 Specification 条件/注释 Condition/Notes 2.3.1 最佳工作温度 Optimum working Temperature 10～35℃ 2.3.2 充电温度范围 Charge temperature range 0～55℃ 充电电流，见附件 A.1 Charging current, see appendix A.1 2.3.3 放电温度范围 Discharge temperature range -30～60℃ 电芯表面温度≤65℃ Cell surface temperature≤65℃ 3. 外观尺寸 Appearance and Dimension 3.1 外观 Appearance 电池外表面无明显的划痕、裂痕、生锈、变色或电解液泄漏，无影响电池正常使用的其它外观缺陷。 Without obvious scratches, cracks, rust, discoloration or electrolyte leakage, no other appearance defects affecting cell normal operation 3.2 尺寸 Dimension 厚度：(20.7±0.5) mm (含外包膜厚度，17%±3%SOC，200±20kgf) Thickness：(20.7±0.5) mm (including outer film thickness, 17%±3%SOC, 200±20kgf) 宽度： (100.5±0.5) mm（底部含 6 层外包膜） Width：(100.5±0.5) mm (the bottom contains six layers of outer film) 高度： (141.5+0.45/-0.5) mm（不含极柱，含外包膜和顶盖贴片） (144.5+0.5/0.35) mm（含极柱，含外包膜和顶盖贴片） Height：(141.5+0.45/-0.5) mm (including outer film thickness and excluding terminals) (144.5+0.5/0.35) mm (including outer film thickness and terminals) 4. 性能测试规范 Performance Specification 4.1 标准测试条件 Standard Testing Condition 4.1.1 单体电池充电 Single cell charging 室温下（25℃±2℃），单体电池以 30A 电流放电至电压为 2.0V，静置 30min，然后再以 30A 电流充电 至电压为 3.65V 时转恒压充电，至充电电流降至 1.5A 时停止充电，充电后静置 30min。 At room temperature （ 25℃±2℃ ） ,30A constant current discharge to 2.0V, rest 30min, then 30A constant current charge to 3.65V followed by constant voltage charging until current drops down to 1.5A, rest 30min. 4.1.2 单体电池放电 Single cell discharging 室温下（25℃±2℃），单体电池以 30A 电流放电至电压为 2.0V，静置 30min。 At room temperature（25℃±2℃）,30A constant current discharge to 2.0V, rest 30min. 4.2 电气特性 Electrical Properties 项目 Item 参数 Specification 条件/注释 Condition/Notes 4.2.1 初始容量 Initial Capacity 30Ah 按照 4.1.1 充电和 4.1.2 放电 Refer to 4.1.1&4.1.2 standard charge and discharge procedure
Conditions & source
2.1.7 交流内阻 ACR 0.6mΩ≤R≤1.2mΩ 25°C±2°C 新电池状态(17%±3%SOC) Fresh cell(17%±3%SOC)
Source version: I · Page 7
Source datasheet (access rules apply)2.1.8 直流内阻 DCR ≤3mΩ 50%SOC@5C10S,25±2°C
Source version: I · Page 7
Source datasheet (access rules apply)Conditions & source
4.5.8常温循环，25℃、按4.1.1充电、1C放电，初始夹紧力150±50kgf；45℃1200次、55℃800次另列，不推测未明确的EOL。
Source version: I · Page 12
Original excerpt
合肥国轩高科动力能源有限公司 HEFEI GOTION HIGH-TECH POWER ENERGY Co.,Ltd 编号 No Q/GX020-2026 标题： Title： IFP20100140A-30Ah 锂离子电池产品规格书 Product Specification of IFP20100140A -30Ah Lithium Ion Rechargeable Cell Total pages 27 Page 12 4.5.6 高 温 循 环 寿 命 High Temperature Cycle Life 800 cycles 使用企业钢板夹具约束单体蓄电池，初 始夹紧力 150±50kgf 55℃, 按 4.1.1 方法充电, 1C 放； 55℃，charged according to the method of 4.1.1 and discharge at 1C under 150±50kgf preload 4.5.7 高 温 循 环 寿 命 High Temperature Cycle Life 1200 cycles 使用企业钢板夹具约束单体蓄电池，初 始夹紧力 150±50kgf 45℃, 按 4.1.1 方法充电, 1C 放； 45℃，charged according to the method of 4.1.1 and discharge at 1C under 150±50kgf preload 4.5.8 常 温 循 环 寿 命 Room Temperature Cycle Life 2000 cycles 使用企业钢板夹具约束单体蓄电池，初 始夹紧力 150±50kgf 25℃, 按 4.1.1 方法充电, 1C 放； 25℃，charged according to the method of 4.1.1 and discharge at 1C under 150±50kgf preload 4.5.9 日历寿命 Calendar Life 10 years 25±2℃，50%SOC ,80%EOL 4.6 安全测试规范 Specification of Safety Test 项目 Item 参数 Specification 条件/注释 Condition/Notes 4.6.1 过 放 电 Over discharging 不爆炸，不起火 No explosion, no fire 单体蓄电池（使用企业钢板夹具约束单体蓄电池 ，夹紧 力 150±50kgf）按 4.1.1 方法充电，再以 1 I1 (A)电流放电 90min， 并观察 1h。 The single cell was charged according to the method of 4.1.1,then was discharged with a current of 1 I1 (A) for 90 min and observed for 1 h.（I1=30） 4.6.2 过 充 电 Over charging 不爆炸，不起火 No explosion, no fire 单体蓄电池（使用企业钢板夹具约束单体蓄电池 ，夹紧 力 150±50kgf）按 4.1.1 方法充电，再以 1 I1 (A)电流恒流充电至电 压 达 到 企 业 技 术 条 件 中 规 定 的 充 电 终 止 电 压 的 1.1 倍 或 115%SOC 后停止充电，并观察 1h。 ）The single cell is charged according to the method of 4.1.1, then is charged with a constant current of 1 I1 (A) until the voltage reaches 1.1 times of the charging end voltage or 115%SOC specified in the technical conditions of the enterprise or the charging time reaches 1 h, and the charging is stopped, and 1 h is observed.（I1=30）
Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge, Cell weight.
Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.
Second source
Similar cells
Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.