Published record
Cylindrical form-factor illustration, not a photograph of Gotion High-tech IFR32135
Form-factor illustration · not a model photograph
LFP / LiFePO₄Cylindrical

Gotion High-tech IFR32135

Gotion High-tech IFR32135: 15Ah, 3.2V LFP cylindrical battery cell. Dimensions Ø33.6 × 139.7 mm.

Capacity

15Ah

Chemistry

LFP / LiFePO₄

Format

Cylindrical

Weight

Not provided

Specification

Engineering parameters

Core fields 3/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandGotion High-tech
ModelIFR32135
Form factorCylindrical
ChemistryLFP / LiFePO₄
Nominal capacity15Ah
Nominal voltage3.2V
DimensionsØ33.6 × 139.7 mm
ApplicationRechargeable
Energy (calculated)48 Wh
Volumetric energy density (calculated)388 Wh/L
Operating temperature
Discharge -30–60 ℃
Conditions & source

原图2.3.3放电范围-30~60℃、最高电芯温度≤60℃;10~35℃为最佳工作温度。

· Page 7

Original excerpt

合 肥 国 轩 高 科 动 力 能 源 有 限 公 司 ' ' 国 巪 稱 HEFEI GUOXUAN HIGH-TECH POWER ENERGY Co 。 Ltd 标 题 : Title. IFR32135-15Ah 锂 离 子 电 池 产 品 规 格 书 Product S ecification fo 「 IFR32[35一 巧 Ah Lithium ion rechar eable cell Q/GX 023 . 2023 第 7 页 共 24 页 2 . 3 工 作 温 度 范 围 Work1ng temperature range 项 目 ltems 2 . 3 . 1 最 佳 工 作 温 度 optimum working temperature 2 . 3 . 2 充 电 温 度 范 围 Charge temperature range 2 、 33 放 电 温 度 范 围 Discharge temperature range 参 数 Specification 10 ~ 35 ℃ . 20 ~ 55 ℃ . 30 一 60 ℃ 条 件 / 注 释 ConditionfNotes 充 电 电 流 , 见 附 件 A 彐 Charg1ng cun•ent , see appendix 最 高 电 芯 温 度 560 ℃ The highest cell tempe17ture 60 ℃ 3 、 外 观 尺 寸 Appearance and Dimension 3 彐 外 观 Appearance 电 池 外 表 面 无 明 显 的 划 痕 、 裂 痕 、 生 锈 、 变 色 或 电 解 液 泄 漏 , 无 影 响 电 池 正 常 使 用 的 其 它 外 观 缺 陷 。 Without scratches , cracks, stains , discoloration or electrolyte lcakagc , no Other appearance defects affectmg cell normal operauon. 3 、 2 尺 寸 Dimens10n 直 径 Diameter; ( 33 . 6 % 4 ) mm ( 含 夕 卜 包 膜 lncluding covering envelop ) 焊 缝 Weld: ( 33 . 6 ± 0 , 2 ) mm ( 含 外 包 膜 lncluding covenng envelop ) 总 高 Total Height : ( 139 . 7 士 0 . 5 ) mm 肩 高 Shoulder Height : ( [ 36 . 2 士 0 . 3 ) mm ( 含 外 包 膜 lncluding covering envelop ) 4 . 性 能 测 试 规 范 Performance specification 4 . 1 标 准 测 试 条 件 Standard tesung condition 生 l.l 单 体 电 池 充 电 Single cell charge 室 温 下 ( 25 ℃ 士 2 ℃ ) , 单 体 电 池 以 7 巧 A 电 流 充 电 至 电 压 为 3 · 5V , 然 后 冉 以 3A 电 流 充 电 至 电 压 为 3 . 65V 时 转 恒 压 充 电 , 至 充 电 电 流 降 至 0 . 75A 时 停 止 充 电 , 充 电 后 静 置 30mmo At ( 25 ℃ 士 2 ℃ 〕 , single cellischarged at7.5Ato 3 巧 V , then charged at3Ato 3 . 65V , fi 引 lowed byconstant voltage charge until current drops down 怖 0 . 75A , stand 「 ör 30 min. 4 . 1.2 单 体 电 池 放 电 Single cell dtscharge 室 温 下 ( 25 ℃ 士 2 ℃ ) , 单 体 电 池 以 巧 A 电 流 放 电 至 电 压 为 2 . OV , 放 电 后 静 置 30min 。 At 〔 25 ℃ ℃ ) , smgle cell is discharged at 巧 Ato 2 . OV, stand for 30 min. 4 . 2 电 气 特 性 Electrical specification 项 目 ltems 42 ] 初 始 容 量 lnitial Capacity 参 数 Specification 巧 Ah 条 件 / 注 释 Condition/Notes 按 照 4 . 1.1 充 电 和 生 1.2 放 电 Charge and discharge as per 4 彐 」 and

Source datasheet (access rules apply)

Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge, Internal resistance, Cell weight, Cycle life.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email