Published record
Prismatic form-factor illustration, not a photograph of Great Power GSP27135206F
Form-factor illustration · not a model photograph
LFP / LiFePO₄Prismatic

Great Power GSP27135206F

Great Power GSP27135206F: 80Ah, 3.2V LFP prismatic battery cell. Dimensions 135 × 28 × 206 mm, cycle life 2,000 cycles.

Capacity

80Ah

Chemistry

LFP / LiFePO₄

Format

Prismatic

Weight

Not provided

Specification

Engineering parameters

Core fields 3/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandGreat Power
ModelGSP27135206F
Form factorPrismatic
ChemistryLFP / LiFePO₄
Nominal capacity80Ah
Nominal voltage3.2V
Dimensions135 × 28 × 206 mm
ApplicationRechargeable
Energy (calculated)256 Wh
Volumetric energy density (calculated)329 Wh/L
Max pulse discharge
≤160 A / 30 s
Conditions & source

由规格书额定容量 80 Ah × 原文 2.0C 换算。 8 Max. pulse discharging current 最大脉冲放电电流 2.0C 30s

Source version: A · Page 4

Original excerpt

8 Max. pulse discharging current 最大脉冲放电电流 2.0C 30s

Source datasheet (access rules apply)
Operating temperature
Charge 0–50 ℃; Discharge -20–55 ℃
Conditions & source

e and relative humidity Range 工作温度和湿度范围 Charge/充电 0~50°C 60±25%R.H. Charge at a very low temperature such as blew 0°C,will be get a lower capacity and reduce cycle life of the battery 低温充电效率会下降,会影响电池使用寿命Discharge/放电 -20~55°C 6

Source version: A · Page 4

Source datasheet (access rules apply)

life of the battery 低温充电效率会下降,会影响电池使用寿命Discharge/放电 -20~55°C 60±25%R.H.11 Storage temperature for a long time 长时间储存温度 -20~55°C 60±25%R.H. Do not storage exceed half year. Must charge once when storage for half year. Must charge

Source version: A · Page 4

Source datasheet (access rules apply)
Internal resistance
≤0.8 mΩ · AC 1000 Hz
Conditions & source

9 Cell Internal Impedance 单电芯内阻 ≤0.8mΩ 1kHz;2%SOC

Source version: A · Page 4

Source datasheet (access rules apply)
Cycle life
≥2,000 cycles
Conditions & source

2 Cycle Life 循环寿命 Charging and discharging battery as blew conditions 0.5C standard charge to 3.65V end-off 1.0C standard discharge to 2.5V cut-off Continuous charge and discharge for 2000 cycles, the capacity will be measure after the 2000th cycle 充放电按以下条件: 0.5C 标准充电至 3.65V,1.0C 标准放电至 2.5V,连续充放电循环 2000 周,在第 2000 周结束后测量容量 ≥80% of initial capacity

Source version: A · Page 5

Source datasheet (access rules apply)

Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Cell weight.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email