Published record
Prismatic form-factor illustration, not a photograph of Great Power GSP39148107F
Form-factor illustration · not a model photograph
LFP / LiFePO₄Prismatic

Great Power GSP39148107F

Great Power GSP39148107F: 72Ah, 3.2V LFP prismatic battery cell. Dimensions 148.3 × 39.72 × 110.8 mm, weight 1.39kg.

Capacity

72Ah

Chemistry

LFP / LiFePO₄

Format

Prismatic

Weight

1.39kg

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandGreat Power
ModelGSP39148107F
Form factorPrismatic
ChemistryLFP / LiFePO₄
Nominal capacity72Ah
Nominal voltage3.2V
Dimensions148.3 × 39.72 × 110.8 mm
ApplicationRechargeable
Energy (calculated)230 Wh
Gravimetric energy density (calculated)166 Wh/kg
Volumetric energy density (calculated)353 Wh/L
Max continuous charge
≤86.4 A
Conditions & source

由规格书额定容量 72 Ah × 原文 1.2C 换算。 Maximum charge current (continuous) 最大可持续充电电流 1.2C 25±2°C, Charging and discharging in excess of standard current will reduces the cell life 25±2°C,超过标准充放电流使用会降低电池寿命

Source version: A01 · Page 6

Original excerpt

Maximum charge current (continuous) 最大可持续充电电流 1.2C 25±2°C, Charging and discharging in excess of standard current will reduces the cell life 25±2°C,超过标准充放电流使用会降低电池寿命

Source datasheet (access rules apply)
Max continuous discharge
≤86.4 A
Conditions & source

由规格书额定容量 72 Ah × 原文 1.2C 换算。 Maximum discharge current (continuous) 最大持续放电电流 1.2C 25±2°C, Charging and discharging in excess of standard power will reduces the cell life 25±2°C,超过标准充放电功率使用会降低电池寿命

Source version: A01 · Page 7

Original excerpt

Maximum discharge current (continuous) 最大持续放电电流 1.2C 25±2°C, Charging and discharging in excess of standard power will reduces the cell life 25±2°C,超过标准充放电功率使用会降低电池寿命

Source datasheet (access rules apply)
Operating temperature
Charge 0–60 ℃; Discharge -30–60 ℃
Conditions & source

技术参数和绝对电芯充电温度均0~60℃;存储后-10~30℃补电周期不是充电边界。

Source version: A01 · Page 5

Original excerpt

DOC No: GP-PS-0189 Page 5 Of 13 PRODUCT SPECIFICATION Version: A01 DATE: 2026-01-16 DOC No.: GP-PS-0189 Guangzhou Great Power Energy & Technology Co., Ltd. Add: NO. 912 Shiliang Rd(Xicun Section), Shawan, Panyu, Guangzhou, China 广州鹏辉能源科技股份有限公司 地址:中国广州市番禺区沙湾镇市良路西村段 912 号 1 Scope of application/适用范围 This document is to specify the specification of 72Ah 3.2V lithium iron cells for energy storage system to be supplied by Great Power Energy & Technology CO. Ltd only. 本说明书详细描述了广州鹏辉能源科技股份有限公司生产的储能用 3.2V 72Ah 磷酸铁锂电池产品性能及产品使用规范。 2 Cell specification/电芯规格 The specification requirements and test specifications of this document mainly refer to the following standards: 本规格书规格要求和测试规范主要参考以下标准: (1) GB/T 36276-2023 电力储能用锂离子电池 (2) UL9540A 电池能量储存系统(BESS)和系统组件的安全标准 (3) UL1973 固定式、车辆辅助电源和轻轨(LER)应用电池标准 (4) IEC62619 含碱性或其他非酸性电解质的二次电池和蓄电池-工业应用中使用的二次锂电池和蓄电池的安全要求 (5) UN38.3 《联合国危险物品运输试验和标准手册》的第 3 部分 38.3 款 2.1 General/概要 No. Items/项目 Specifications/规格 Remark/备注 2.1.1 Nominal capacity 标称容量 72Ah Refer to 2.2&2.3 standard charge and discharge procedure 参考 2.2 与 2.3 标准充放电模式测试2.1.2 Nominal energy 标称能量 230.4Wh 2.1.3 Nominal voltage 标称电压 3.2V 2.1.4 Operation voltage 工作电压 2.5~3.65V,T>0℃ 2.0~3.65V,T≤0℃ No matter what operate mode the battery is in, stop charging and discharging once the cell voltage exceeds absolute operate voltage 无论电芯处在何种工作模式,一旦发现电芯电压超 过工作电压范围即停止充放电 2.1.5 Cell impedance (ACR) 交流内阻 ≤0.5 mΩ Fresh cell (20%~50%SOC),AC 1KHZ 新电池状态(20%~50%SOC),1KHz 交流电阻 2.1.6 Delivery capacity 出货容量 27%±3% SOC N/A 2.1.7 Residual capacity loss 月自放电 Per month ≤3.0% ≤3.0%/月 Fresh cell after 3 months, 20%~50%SOC, 25±2°C 出货三个月以后的电芯,20%~50%SOC,25±2℃储存 2.1.8 Charging temperature 充电温度 0~60℃ Reference to paragraph 2.2 参考第 2.2 节 2.1.9 Discharging temperature 放电温度 -30~60℃ Reference to paragraph 2.2 参考第 2.3 节 2.1.10 Cell weight 电池重量 1.39±0.05kg N/A 2.1.11 Storage temperature 存储温度 -30~60℃(-10℃~30℃ is recommended for storage) -30~60℃(建议-10℃~30℃) Storage ambient humidity < 85% ROH, no condensation,the cells are advised to be charge-discharge after storage 6 months 存储环境湿度<85%ROH,无凝露,存储超过 6 个月需要充 放电维护 2.1.12 Typical dimension (W*H*T) 电池尺寸 Width/宽度:148.3±0.5mm Height/高度:110.8±0.5mm Thickness/厚度:39.72±0.5mm Thickness with compression force (300±20Kgf), Height with Terminal,BOL (Reference to item 4) 300±20Kgf 压力下,高度含极柱,新鲜电池 (详见本技术协议第 4 条) 2.1.13 Rest SOC 静置 SOC ≥5% SOC interval without load or charging 无负载或充电时的 SOC 区间

Source datasheet (access rules apply)

erence to paragraph 2.2 参考第 2.2 节 2.1.9 Discharging temperature 放电温度 -30~60°C Reference to paragraph 2.2 参考第 2.3 节 2.1.10 Cell weight 电池重量 1.39±0.05kg N/A 2.1.11 Storage temperature 存储温度 -30~60°C(-10°C~30°C is recommended for storage) -30~60°C

Source version: A01 · Page 5

Source datasheet (access rules apply)
Internal resistance
≤0.5 mΩ · AC 1000 Hz
Conditions & source

2.1.5 Cell impedance (ACR) 交流内阻 ≤0.5 mΩ Fresh cell (20%~50%SOC),AC 1KHZ 新电池状态(20%~50%SOC),1KHz 交流电阻

Source version: A01 · Page 5

Source datasheet (access rules apply)
Cell weight
1,390 g
Conditions & source

2.1.10 Cell weight 电池重量 1.39±0.05kg N/A

Source version: A01 · Page 5

Source datasheet (access rules apply)

Not provided: Voltage range, Max pulse charge, Max pulse discharge, Cycle life.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email