Published record

LFP / LiFePO₄Prismatic

Great Power GSP42173166F

Name: Great Power GSP42173166F
Brand: Great Power

Great Power GSP42173166F: 135Ah, 3.2V LFP prismatic battery cell. Dimensions 173 × 43.5 × 166 mm, cycle life 2,000 cycles.

Capacity

135Ah

Chemistry

LFP / LiFePO₄

Format

Prismatic

Weight

Not provided

View datasheets (2)Ask about this model

Specification

Engineering parameters

Core fields 3/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandGreat Power

ModelGSP42173166F

Form factorPrismatic

ChemistryLFP / LiFePO₄

Nominal capacity135Ah

Nominal voltage3.2V

Dimensions173 × 43.5 × 166 mm

ApplicationRechargeable

Energy (calculated)432 Wh

Volumetric energy density (calculated)346 Wh/L

Max pulse discharge

≤270 A / 30 s

Conditions & source

由规格书额定容量 135 Ah × 原文 2.0C 换算。 8 Max. pulse discharging current 最大脉冲放电电流 2.0C 30s

· Page 4

Original excerpt

8 Max. pulse discharging current 最大脉冲放电电流 2.0C 30s

Source datasheet (access rules apply)

Operating temperature

Charge 0–50 ℃; Discharge -20–55 ℃

Conditions & source

e and relative humidity Range 工作温度和湿度范围 Charge/充电 0~50°C 60±25%R.H. Charge at a very low temperature such as blew 0°C,will be get a lower capacity and reduce cycle life of the battery 低温充电效率会下降,会影响电池使用寿命Discharge/放电 -20~55°C 6

· Page 4

Source datasheet (access rules apply)

life of the battery 低温充电效率会下降,会影响电池使用寿命Discharge/放电 -20~55°C 60±25%R.H.11 Storage temperature for a long time 长时间储存温度 -20~55°C 60±25%R.H. Do not storage exceed half year. Must charge once when storage for half year. Must charge

· Page 4

Source datasheet (access rules apply)

Internal resistance

≤0.5 mΩ · AC 1000 Hz

Conditions & source

9 Cell Internal Impedance 单电芯内阻 ≤0.5mΩ 1kHz;2%SOC

· Page 4

Source datasheet (access rules apply)

Cycle life

≥2,000 cycles

Conditions & source

2 Cycle Life 循环寿命 Charging and discharging battery as blew conditions 0.5C standard charge to 3.65V end-off 1.0C standard discharge to 2.5V cut-off Continuous charge and discharge for 2000 cycles, the capacity will be measure after the 2000th cycle 充放电按以下条件: 0.5C 标准充电至 3.65V,1.0C 标准放电至 2.5V,连续充放电循环 2000 周,在第 2000 周结束后测量容量 ≥80% of initial capacity

· Page 5

Source datasheet (access rules apply)

Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Cell weight.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.