Published record
Cylindrical form-factor illustration, not a photograph of Great Power INR18650-2600
Form-factor illustration · not a model photograph
NMCCylindrical

Great Power INR18650-2600

Great Power INR18650-2600: 2.6Ah, 3.6V NMC cylindrical battery cell. Dimensions Ø18.3 × 65.2 mm, weight 44g, cycle life 500 cycles.

Capacity

2.6Ah

Chemistry

NMC

Format

Cylindrical

Weight

44g

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandGreat Power
ModelINR18650-2600
Form factorCylindrical
ChemistryNMC
Nominal capacity2.6Ah
Nominal voltage3.6V
DimensionsØ18.3 × 65.2 mm
ApplicationRechargeable
Energy (calculated)9.4 Wh
Gravimetric energy density (calculated)213 Wh/kg
Volumetric energy density (calculated)546 Wh/L
Operating temperature
Charge 0–45 ℃; Discharge -20–65 ℃
Conditions & source

e and relative humidity Range 工作温度和湿度范围 Charge/充电 0~45°C 60±25%R.H. Charge at a very low temperature such as blew -10 °C ,will be get a lower capacity and reduce cycle life of the battery 低于-10°C的充电效率会下降,会影响电池使用寿命 Discharge/放电

Source version: A · Page 5

Source datasheet (access rules apply)

f the battery 低于-10°C的充电效率会下降,会影响电池使用寿命 Discharge/放电 -20~65°C 60±25%R.H.13 Storage temperature for a long time 长时间储存温度 -20~45°C 60±25%R.H. Do not storage exceed half year. Must charge once when storage for half year. Must charge

Source version: A · Page 5

Source datasheet (access rules apply)
Internal resistance
≤30 mΩ · AC 1000 Hz
Conditions & source

8 Cell AC Internal Impedance 单电芯交流内阻 ≤30mΩ(不含 PTC) Internal resistance measured at AC 1KHz after 50% charge 半电态下用交流法测量内阻

Source version: A · Page 4

Source datasheet (access rules apply)
Cell weight
44 g
Conditions & source

9 Weight 重量 44±2g

Source version: A · Page 4

Source datasheet (access rules apply)
Cycle life
≥500 cycles · EOL 80%
Conditions & source

3 Cycle Life 循环寿命 Charging and discharging battery as blew conditions 0.2C standard charge to 4.2V end-off 1.0C standard discharge to 2.75V cut-off Continuous charge and discharge for 500 cycles ,the capacity will be measure after the500thcycle 充放电按以下条件: 0.2C 标准充电至 4.2V,1.0C 放电至 2.75V,连续充放电循环 500 周,在第 500 周结束后测量容量 ≥80% of initial capacity ≥80%初始容量

Source version: A · Page 6

Source datasheet (access rules apply)

Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email