CellDBBattery intelligence
Published record
Prismatic form-factor illustration, not a photograph of Highstar NaCP71173208-160E3
Form-factor illustration · not a model photograph
Sodium-ionPrismatic

Highstar NaCP71173208-160E3

Highstar NaCP71173208-160E3 sodium-ion cell. Minimum capacity 160 Ah, nominal voltage 2.86 V; standard power 225 W (0.5P). Voltage window 1.5-3.45 V. Dimensions 173.7 x 71.7 x 207.0 mm including terminals (shoulder 204.2 mm); weight 4650 +/-300 g. Source lists 6000 cycles to 80% and 10000 to 70%, but Chinese and English cycle voltage windows conflict (1.5 versus 2.5 V lower endpoint), so no single cycle-life value is asserted. Revision A/2 is dated 2026.03. This Highstar document is distinct from the already listed Zhongna model with the same model text.

Capacity

160Ah

Chemistry

Sodium-ion

Format

Prismatic

Weight

4.65kg

View datasheets (2)Ask about this model

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandHighstar
ModelNaCP71173208-160E3
Form factorPrismatic
ChemistrySodium-ion
Nominal capacity160Ah
Nominal voltage2.86V
Voltage range1.5–3.45 V
Dimensions173.7 × 71.7 × 207 mm
ApplicationRechargeable
Energy (calculated)458 Wh
Gravimetric energy density (calculated)98.4 Wh/kg
Volumetric energy density (calculated)177 Wh/L
Operating temperature
Charge 0–? ℃; Discharge -40–60 ℃
Conditions & source

工作及使用说明充电下限均0℃；上限60/45℃冲突，留空。

Source version: A/2 · Page 4

Original excerpt

DOC NO.: SHEET : ECN NO. : 系统充电单体电压建议报警值 Suggested alarm value for the voltage of individual cells during system charging 一级报警：3.30V (降低功率) Level 1 alarm: 3.30V (Reduce power) 二级报警：3.35V (停止充电) Level 2 alarm: 3.35V (Stop charging) 三级报警：3.45V (安全保护) Level 3 alarm: 3.45V (safety protection) 13 NaCP71173208-160E3 4 OF 22 Q/KAGG1550-2024 1 Scope This document describes the Product Specification of the Sodium-ion rechargeable battery cell supplied by JiangSu Highstar Battery Manufacturing Co..LTD. 适用范围 本规格说明书描述了江苏海四达电源有限公司生产的可充电钠离子电芯的产品性能指标。 2 Model: NaCP71173208-160E3 PRODUCT SPECIFICATION 型号： NaCP71173208-160E3 3 Cell Specification 电池规格参数 3.1Fundamental Parameters 电池基本参数 No. Items（项目） Standards标准 Remarks（备注） 1 Min. Capacity最小容量 160Ah 0.5C 25± 2℃ 1.5-3.45V 2 Min. Energy最小能量 450Wh 0.5P 25±2℃ 1.5-3.45V 3 Initial IR初始内阻 ≤0.30mΩ AC，1kHz，15%SOC 4 Nominal Voltage标称电压 2.86V 0.5P 1.5~3.45V 5 Weight电池重量 4650g± 300g 6 Charging Cut-off Voltage 充电限制电压（Umax） 3.45V 7 Discharging Cut-off Voltage 放电截止电压（Umin） 1.5V 8 Standard Charging Power 标准充电功率 225 0.5P 9 Standard Disharging Power 标准放电功率 225 0.5P 10 25℃ Standard Cycle25℃ 标准循环 6000Cycles@80% ； 10000Cycles@70 % Under 300kgf±20kgf clamping force, 25℃±2℃ 0.5P/0.5P, 2.5~3.45V. 300± 20kgf夹紧力下，25℃±2℃ 0.5P/0.5P， 1.5V~3.45V Charging Temperature 充电温度 0~60℃ Disharging Temperature 放电温度 -40~60℃ 1 year 1年 0~35℃ 1 month 1个月 -20~45℃ 11 12 Operation Temperature 工作温度 Storage Temperature Delivery SOC Stat 出货SOC状态

Source datasheet (access rules apply)

工作及使用说明放电环境均-40～60℃；25～35℃仅最佳放电温度。

Source version: A/2 · Page 4

Original excerpt

DOC NO.: SHEET : ECN NO. : 系统充电单体电压建议报警值 Suggested alarm value for the voltage of individual cells during system charging 一级报警：3.30V (降低功率) Level 1 alarm: 3.30V (Reduce power) 二级报警：3.35V (停止充电) Level 2 alarm: 3.35V (Stop charging) 三级报警：3.45V (安全保护) Level 3 alarm: 3.45V (safety protection) 13 NaCP71173208-160E3 4 OF 22 Q/KAGG1550-2024 1 Scope This document describes the Product Specification of the Sodium-ion rechargeable battery cell supplied by JiangSu Highstar Battery Manufacturing Co..LTD. 适用范围 本规格说明书描述了江苏海四达电源有限公司生产的可充电钠离子电芯的产品性能指标。 2 Model: NaCP71173208-160E3 PRODUCT SPECIFICATION 型号： NaCP71173208-160E3 3 Cell Specification 电池规格参数 3.1Fundamental Parameters 电池基本参数 No. Items（项目） Standards标准 Remarks（备注） 1 Min. Capacity最小容量 160Ah 0.5C 25± 2℃ 1.5-3.45V 2 Min. Energy最小能量 450Wh 0.5P 25±2℃ 1.5-3.45V 3 Initial IR初始内阻 ≤0.30mΩ AC，1kHz，15%SOC 4 Nominal Voltage标称电压 2.86V 0.5P 1.5~3.45V 5 Weight电池重量 4650g± 300g 6 Charging Cut-off Voltage 充电限制电压（Umax） 3.45V 7 Discharging Cut-off Voltage 放电截止电压（Umin） 1.5V 8 Standard Charging Power 标准充电功率 225 0.5P 9 Standard Disharging Power 标准放电功率 225 0.5P 10 25℃ Standard Cycle25℃ 标准循环 6000Cycles@80% ； 10000Cycles@70 % Under 300kgf±20kgf clamping force, 25℃±2℃ 0.5P/0.5P, 2.5~3.45V. 300± 20kgf夹紧力下，25℃±2℃ 0.5P/0.5P， 1.5V~3.45V Charging Temperature 充电温度 0~60℃ Disharging Temperature 放电温度 -40~60℃ 1 year 1年 0~35℃ 1 month 1个月 -20~45℃ 11 12 Operation Temperature 工作温度 Storage Temperature Delivery SOC Stat 出货SOC状态

Source datasheet (access rules apply)
Internal resistance
≤0.3 mΩ · AC
Conditions & source

将电池按标准充电方法充电后,在1h内测量其AC 1kHz下的交流阻抗。 ≤0.3mΩ

Source version: A/2 · Page 5

Source datasheet (access rules apply)
Cell weight
4,650 g

Not provided: Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge, Cycle life.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

sddczhu@gmail.com

Compose email