Published record
Cylindrical form-factor illustration, not a photograph of Qingna S40160RL
Form-factor illustration · not a model photograph
Sodium-ionCylindrical

Qingna S40160RL

Qingna S40160RL sodium-ion cell. Nominal capacity 17.5 Ah, minimum 17 Ah at 25 +/-2 C and 0.5C/0.5C. Nominal voltage 3.0 V, voltage window 1.5-3.95 V. Maximum envelope diameter 40.5 +/-0.2 mm (lower body 40.2 +/-0.2 mm), height 160 +/-0.3 mm; weight 435 +/-10 g including packaging. Maximum continuous discharge 4C (70 A) applies at 15-45 C. >=3000 cycles at 25 +/-2 C, 0.5C/0.5C to 80% SOH. Effective date 2024-05-18; controlled stamp is dated 2024-05-20.

Capacity

17.5Ah

Chemistry

Sodium-ion

Format

Cylindrical

Weight

435g

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandQingna
ModelS40160RL
Form factorCylindrical
ChemistrySodium-ion
Nominal capacity17.5Ah
Nominal voltage3V
Voltage range1.5–3.95 V
DimensionsØ40.5 × 160 mm
ApplicationRechargeable
Energy (calculated)52.5 Wh
Gravimetric energy density (calculated)121 Wh/kg
Volumetric energy density (calculated)255 Wh/L
Max continuous discharge
70 A
Operating temperature
Charge 0–60 ℃
Conditions & source

8.3.1c原图中英文一致:充电温度0~60℃,不把OCR乱码当作数值。

Source version: A/1 · Page 10

Original excerpt

ON ^ c) d) g) h) i) j) k) 0 ) p) 青 钠 DO not subject the cell t0 strong mechanical shocks 不 要 使 电 池 承 受 过 重 的 机 械 冲 击 。 DO not immezse the cell in water or sea water , or get it wet. 不 要 将 电 池 浸 入 海 水 或 水 中 , 或 者 使 其 吸 湿 。 DO not revcrse 0 polarity ofthe cell for any reason. 不 要 颠 倒 电 池 的 正 负 极 。 DO not disassemble ormodi$' the cell. 不 要 拆 卸 或 修 整 电 池 。 DO orstorewithmetalliclikenecklaces , coins or hairpins etc. 不 要 和 项 链 , 硬 币 或 发 夹 等 金 属 物 品 放 置 在 一 起 . DO not use the cell with conspicuous damage or deformation. 不 要 使 电 池 受 到 明 显 的 损 害 或 变 形 。 DO not connect cell tO the plug socket or car-clgarette-plug. 不 要 将 电 池 与 插 座 连 接 。 DO 《 touch a leaked cell directly. 不 要 直 接 接 触 泄 漏 的 电 池 。 DO not use Sodium-ion 耵 in mixture. 不 要 将 钠 离 了 电 池 混 合 使 用 · DO not use or leave the cell undcr the blazing sun 〔 or in heated car by sunshine). 不 要 将 电 池 放 置 在 太 阳 光 直 射 的 地 方 。 Keep cell away om children. 将 电 池 放 置 在 远 离 丿 L 童 的 地 方 。 DO a nail intO the , strike it by hammer tread it. 不 要 针 刺 , 锤 打 或 践 踏 电 池 “ DO not give cell impact g it. 不 要 撞 击 或 投 掷 电 池 。 DO not put Battery Cell tO microwave oven or high pressure container. 不 要 电 池 放 入 微 波 炉 或 高 压 容 器 中 。 2U24 伍 2 0 I 發 件 83 CelI Operation lnstructions 电 池 使 用 说 明 8 · 3 · 1 Charging 充 电 a) WhenüleCellischarged,thespecifiedchargemethodandcunentdescribedinthisPS-Documentshouldapply. If charge current exceeds the upper limit Of the specified range , characteristics and 呼 Of the Battery Cell could be deteriorated , or it may cause heat , explosion and fire. 应 遵 守 本 规 格 书 的 充 电 方 式 。 如 果 超 过 电 流 上 限 , 电 池 的 安 全 性 将 不 能 被 保 证 , 会 引 起 发 热 , 爆 炸 , b) Whenthemoduleisused , thecharging v01tageofasmglestringcannotexceed4.0V. 模 组 使 用 时 , 单 串 充 电 电 压 不 能 超 过 4 . 0V 。 c) Chargethecellina 6 俨 C . 电 池 充 电 温 度 范 围 为 0 ℃ ~ 60 ℃ 。 d) Useaconstantcurrent, constantv01tage()C ℃ V)Sodium-10n (Na+)ceIlchargecontr011er. 使 用 恒 流 恒 压 钠 离 子 电 池 充 电 器 。 8 . 3 . 2 Discharging 放 电 a) 1hedischargecurrentshouldnotexceedthedesignatedcurrentdescribedinthisPS-Document. lfthe discharge 安 徹 青 钠 能 源 科 技 有 限 公 司 安 省 广 市 济 丌 发 区 宁 乡 号 Anhui QNAS Energy T 毿 hno 丨 0 CO ” LTD No. 20 Ningxiang R0äd. Cuangde Economic D 剀 e 巧 p 仃 “ 1t · Xuancheng CQy. № 。 酋 “

Source datasheet (access rules apply)
Cell weight
435 g
Cycle life
3,000 cycles

Not provided: Max continuous charge, Max pulse charge, Max pulse discharge, Internal resistance.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email