Published record

LFP / LiFePO₄Prismatic

REPT BATTERO CB2F

Name: REPT BATTERO CB2F
Brand: REPT BATTERO

REPT BATTERO CB2F: 120Ah, 3.2V LFP prismatic battery cell. Dimensions 148.46 × 52.32 × 117.31 mm, weight 2.03kg, cycle life 2,500 cycles.

Capacity

120Ah

Chemistry

LFP / LiFePO₄

Format

Prismatic

Weight

2.03kg

View datasheets (1)Ask about this model

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandREPT BATTERO

ModelCB2F

Form factorPrismatic

ChemistryLFP / LiFePO₄

Nominal capacity120Ah

Nominal voltage3.2V

Voltage range2.5–3.65 V

Dimensions148.46 × 52.32 × 117.31 mm

ApplicationRechargeable

Energy (calculated)384 Wh

Gravimetric energy density (calculated)189 Wh/kg

Volumetric energy density (calculated)421 Wh/L

Operating temperature

Charge ?–55 ℃; Discharge -30–? ℃

Conditions & source

工作充电上限55℃；下限-20℃与温度梯度表-30℃不一致，保留下限为空。

· Page 6

Original excerpt

Product Specification 3 3. 1 概要 No. 序号 Item 项目 Specification 规格 Comment 备注 3.1.1 Nominal Capacity 标称容量 121.2Ah（1/3C） 120Ah（1C） 25±2℃ 3.1.2 Nominal Energy 标称能量 389Wh 25℃ 1/3C 3.1.3 Voltage 工作电压范围 2.5~3.65V(＞0℃) 2.0~3.65V(≤ 0℃) 3.1.4 Maximum Discharging Current 峰值放电电流 950 A 25℃, 50%SOC, 10s 3.1.5 Maximum Charging Current 峰值充电电流 360A 25℃, 50%SOC, 10s 3.1.6 Working Temperature 使用温度 Charge 充电：-20℃~55℃ Discharge 放电：-30℃~55℃ 3.1.7 Storage Temperature 贮存温度 -40℃~60℃ 3.1.8 Dimensions 电池尺寸 Thickness 厚度: 52.32±0.30mm Width 宽度: 148.46±0.50mm 总高: 117.31±0.60mm @3000±200 N，17%SOC 3.1.9 Cathode Material 正极材料磷酸铁锂 Lithium-iron-phosphate 3.1.10 Cell Weight 电池重量 2.03±0.03kg 3.1.11 Weight Energy Density 重量能量密度 ≥190 Wh/kg 25℃ 1/3C 标称 3.1.12 Volume Energy Density 体积能量密度 ≥436 Wh/L 25℃ 1/3C 标称 3.1.13 IMP 电池内阻（1KHz） ≤0.5mΩ 3.1.14 Shipping capacity 出货容量 20.74±2.4Ah 17%±2%SOC 3.1.15 Cycle Life 循环寿命 ≥2500 @80%SoH 25±2℃,100%DoD, Fastcharge (10-80%SOC 19min) / 1C 3.1.16 Recommended SOC Range 建议 SOC 使用范围 3%~100%

Source datasheet (access rules apply)

工作和使用说明放电下限均-30℃；上限55℃和60℃未确认口径，保留为空。

· Page 6

Original excerpt

Source datasheet (access rules apply)

Internal resistance

≤0.5 mΩ · AC 1000 Hz

Conditions & source

3.1.13 IMP 电池内阻(1KHz) ≤0.5mΩ

· Page 6

Source datasheet (access rules apply)

Cell weight

2,030 g

Conditions & source

Cell Weight 电池重量 2.03±0.03kg

· Page 6

Source datasheet (access rules apply)

Cycle life

≥2,500 cycles · EOL 20%

Conditions & source

4.3.6 循环寿命 Cycle Life 1) 测试温度: 25±2°C。 2) Test temperature: 25±2°C.3) 初始夹紧力 300±20Kgf。 4) Under 300 ± 20 Kgf preload.5) 采用 StepCharge 方式充电,静置 30min。 6) Use StepCharge mode to charge and stand by 30min.7) 将电池以 1.0I1(A)电流放电至 2.5V,并静置 30min。 8) Discharge with a current at 1.0I1(A) to 2.5V and stand by 30min.9) 重复 3)和 4)步骤, 直到电池容量小于 80% 的初始容量,并记录循环次数。 10) Cycle step 2) and 3) until capacity loss is more than 20% and record cycle number. 循环寿命≥ 2500 次 Cycle number ≥2500 times

· Page 11

Source datasheet (access rules apply)

Not provided: Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.