Published record
Cylindrical form-factor illustration, not a photograph of SunPower IFR26700 4300mAh
Form-factor illustration · not a model photograph
LFP / LiFePO₄Cylindrical

SunPower IFR26700 4300mAh

SunPower (Changhong Sanjie) IFR26700 4300mAh rechargeable lithium-ion cell. Capacity 4.3 Ah at 0.2C with 2.0 V cutoff; nominal voltage 3.2 V. Continuous discharge limit 12.9 A. Diameter <=26.60 mm, height <=71.20 mm (including PET), weight <=100 g are maxima. Charging voltage 3.65 +/-0.05 V. LFP chemistry is corroborated by the manufacturer's 26700 LiFePO4 product range.

Capacity

4.3Ah

Chemistry

LFP / LiFePO₄

Format

Cylindrical

Weight

100g

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandSunPower
ModelIFR26700 4300mAh
Form factorCylindrical
ChemistryLFP / LiFePO₄
Nominal capacity4.3Ah
Nominal voltage3.2V
Voltage range2–3.65 V
DimensionsØ26.6 × 71.2 mm
ApplicationRechargeable
Energy (calculated)13.8 Wh
Gravimetric energy density (calculated)138 Wh/kg
Volumetric energy density (calculated)348 Wh/L
Max continuous discharge
12.9 A
Operating temperature
Discharge -20–60 ℃
Conditions & source

50°C Max. Charge Current 最大充电电流: 4.3A Discharge 放电 -20°C~60°C 17 Storage temperature 储存温度 3 months 3 个月 -20°C~45°C 1 year 1 年 -20°C~25°C Note: If the cell is kept as ex-factory status (30% of charge), the capacity recovery

Source version: A/004 · Page 3

Source datasheet (access rules apply)
Internal resistance
≤15 mΩ · AC 1000 Hz
Conditions & source

15 AC Impedance (at 1000Hz、30%SOC) 交流内阻 (at 1000Hz、30%SOC) ≤15m Ω

Source version: A/004 · Page 3

Source datasheet (access rules apply)
Cell weight
100 g
Cycle life
≥1,000 cycles
Conditions & source

Cycle Life (25°C±3°C) 循环寿命 (25°C±3°C) 1C charge/ 1C discharge 1000 cycles≥70% 1C 充电/ 1C 放电 1000 次≥70% Charge: 1C CC charge to 3.65V, then CV to 0.1A, rest for 10mins; A) Discharge1C CC discharge to 2.0V rest for 10mins. 充电:1C 恒流充电至 3.65V,然后恒压至 0.1A 截止,搁置 10min。 放电:1C 放电到 2.0V,搁置 10mins。

Source version: A/004 · Page 6

Source datasheet (access rules apply)

Not provided: Max continuous charge, Max pulse charge, Max pulse discharge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.

Customer support

Datasheets, account access, and procurement enquiries.

Compose email