Published record

LFP / LiFePO₄Prismatic

Sunwoda SBP-01-3140

Name: Sunwoda SBP-01-3140
Brand: Sunwoda

Sunwoda SBP-01-3140: 314Ah, 3.2V LFP prismatic battery cell. Dimensions 174.3 × 71.53 × 206.9 mm, weight 5.6kg, cycle life 6,000 cycles.

Capacity

314Ah

Chemistry

LFP / LiFePO₄

Format

Prismatic

Weight

5.6kg

View datasheets (1)Ask about this model

Specification

Engineering parameters

Core fields 4/4 · 0 individually confirmed fields
Coverage counts capacity, voltage, dimensions and weight; it does not certify the model. Missing fields are not zero. Expand each metric to inspect its conditions and evidence.

BrandSunwoda

ModelSBP-01-3140

Form factorPrismatic

ChemistryLFP / LiFePO₄

Nominal capacity314Ah

Nominal voltage3.2V

Dimensions174.3 × 71.53 × 206.9 mm

ApplicationRechargeable

Energy (calculated)1,005 Wh

Gravimetric energy density (calculated)179 Wh/kg

Volumetric energy density (calculated)390 Wh/L

Operating temperature

Charge 0–60 ℃; Discharge -30–60 ℃

Conditions & source

内阻(1kHz,50%SOC)Impedance <0.21 mΩ 12 绝对充电温度范围 charge temperature scope 0°C~ 60°C 13 绝对放电温度范围 discharge temperature scope -30°C~ 60°C 14 存储温度 storage temperature -40°C~ 60°C 15 最佳工作温度 the optimum working temperature

Source version: A1 · Page 7

Source datasheet (access rules apply)

ge temperature scope 0°C~ 60°C 13 绝对放电温度范围 discharge temperature scope -30°C~ 60°C 14 存储温度 storage temperature -40°C~ 60°C 15 最佳工作温度 the optimum working temperature 25°C~ 35°C 16 月自放电(25±2°C 30 -50%SOC 新电池三个月内)res

Source version: A1 · Page 7

Source datasheet (access rules apply)

Internal resistance

0.21 mΩ · AC 1000 Hz

Conditions & source

11 电池内阻(1kHz,50%SOC)Impedance <0.21 mΩ

Source version: A1 · Page 7

Source datasheet (access rules apply)

Cell weight

5,600 g

Conditions & source

4 电池重量 cell weight 5.6±0.25 Kg

Source version: A1 · Page 6

Source datasheet (access rules apply)

Cycle life

≥6,000 cycles · EOL 80%

Conditions & source

循环性能 (25±2°C) (0.5CP/0.5C P) 25±2°C, 电池在300kgf夹具下: 以0.5 CP 恒功率充电至 3.65V,搁置30min,以0.5 CP 恒功率放电至2.5V,搁置 30min,再进行下一次循环,至容量衰减为标称容量的 80%止。 At 25±2°C and 300kgf clamp force, charge the cell at 0.5CP to 3.65V , rest 30min, then discharge at 0.5CP to 2.5V , rest 30min. Keep cycling to the capacity of battery reach to 80% nominal capacity. ≥6000次; ≥6000 times

Source version: A1 · Page 10

Source datasheet (access rules apply)

Not provided: Voltage range, Max continuous charge, Max continuous discharge, Max pulse charge, Max pulse discharge.

Source note: Values should be verified against the latest manufacturer datasheet before pack design or procurement approval. Calculated values derive from the nominal figures above and are not manufacturer ratings.

Second source

Similar cells

Same chemistry and format, with nominal capacity within 10%. This is a starting point, not a confirmation that the cells are interchangeable.